Construction Chemicals

Approx. Rs 200 / LitreGet Latest Price

• Improving Life Of Structures By Secondary Waterproofing:Present Scenario of Concrete & Masonry StructuresPrimary Waterproofing is always provided by an elastic coating/membrane. However, the general resistance to water penetration and the resultantly improved durability of structures is often ignored but can be achieved through Secondary Waterproofing.More than 85% of the concrete produced in India is still made by volume batching. There is lack of control of W/C ratio at sites. The control on quality of sand and aggregate is very limited. The concrete usually has high permeability.In the foundation concrete, there is ingress of salts and water. This causes deterioration of concrete and also the groundwater rises in the walls through the capillaries in mortar and bricks. This leads to persistent rising dampness and peeling-of paints in walls at the ground level.The pollutants like CO2 etc. along with water enter into the concrete above ground leading to rebar corrosion and deterioration of concrete.Site-mixed mortar and plaster are commonly in use, unlike pre-mix mortars used in other countries. The site-mixed mortars lack adhesion and cohesive properties compared to the international practice. Ultimately, cracks appear in mortar and plaster surfaces.All in all, cracks and dampness in concrete & masonry structures bring down their actual life from the designed level.
• Comparison of normal concrete with Dr. Fixit Pidiproof LW+ concrete:
• For the same set of cement, sand, aggregates, and water, the effect of adding Dr. Fixit Pidiproof LW+ into the concrete has been compared below.The compressive strength of concrete specimen with Dr. Fixit Pidiproof LW+ shows an increase of 7% in 28 days. The RCPT value (a measure of chloride penetration), water permeability and drying shrinkage of the concrete specimen with Dr. Fixit Pidiproof LW+ shows 27%, 39% and 30% reduction which is quite significant. What is remarkable is that Dr. Fixit Pidiproof LW+ concrete has shown improved impermeability over PPC concrete, which by itself is more impermeable than OPC concrete.
• How does Dr. Fixit Pidiproof LW+ work?Narrow lanes called capillaries are formed during hydration of cement. These voids become a route for ingress of chlorides, sulphates etc. Dr. Fixit Pidiproof LW+ breaks these capillaries. Some hydrophobic polymeric molecules present in Dr. Fixit Pidiproof LW+, fill the pores and imparts a hydrophobic environment, which repels the water molecule and increases the impermeability property of the mortar or concrete.The polymeric and the cement particles have the same charge and hence particles disperse and release locked water. This improves workability, hydration and increases the strength of concrete/mortar.Some selective polymeric particles also get into the pores and the impermeability gives the delaying corrosion property and also act against rising dampness. These particles are very fine micro-particles which reach all the rear points and throughout the mortar or concrete matrix.
• There is the improvement in cohesiveness. This reduces the rebound loss in trowelling, leading to higher mason productivity.An overall effect of reduced cracking is observed

Additional Information: