Dr. Fixit Chemicals

Approx. Rs 4,700 / BucketGet Latest Price

• Dr. Fixit Newcoat coool is a heat reducing & ‘Energy Saving’ acrylic waterproofing coating providing a seamless waterproof barrier that can withstand expansion and contraction movements due to heat build-up on the roof surfaces. It helps in reduction of energy usages by less heat transfer into buildings thus keeps the interiors cool.
•  The coating serves the dual purpose of thermal reduction & with additional waterproofing protection.
• Dr. Fixit Newcoat Coool has excellent crack bridging ability to prevent water leakages through the hairline cracks developed on the roof surfaces. 
• It provides the solution to building owners roof maintenance by extending the roof service life, and improve the building’s aesthetics.

• Building Roofs / Terraces – Flat & Slope.
• Over existing cementitious waterproofing treatments like sound brick-bat coba, concrete screeds, acrylic coatings, etc.

• Solar Reflectance - 106 (ASTM E 1980), re-radiated heat back to atmosphere UV and IR resistant - resistance to UV & IR emission, protects the coating from damage and reduces heat conductivity.
• Waterproofing - Excellent resistance to stagnant water (ponding) on flat roof/terraces due to continuous heavy rains (monsoon) for several days and months.
• Resilience & Crack bridging - Forms highly elastic, tough & resilient coating so as to helps withstand the structural movements that can bridges cracks up to 2 mm width.
• Abrasion-resistant – Non-slip and suitable for light foot traffic.
• Long-term Durability – Excellent UV Resistance and all-weather Proof
• Application advantage - No need to remove existing sound BB coba and/or concrete surfaces
• Energy Saving – Low heat transfer into building hence reduction in electrical consumption
• Non-Toxic water based system - eco-friendly

• Prepare the surface thoroughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles.
• Ensure that the roof slope is a minimum of 1 in 100 to enable the water runoff.
• In existing old terraces such as brickbat-coba or screeds, the substrate must be checked for its soundness. Damaged or hollow portions, sharp edges, etc. must be cut and repaired with a polymer-modified screed. Surface cracks must be filled with Dr. Fixit Crack-X or polymer-modified mortar in case of wider cracks.
• Bitumen based waterproofing treatments must be completely removed by mechanical scarification or by any other effective mechanical means.

• Apply one coat of Dr. Fixit Primeseal (diluted with water in the ratio 2:1) at the rate of 8 -10 sqm/ liter. Allow it to dry for 2-3 hours.
• Apply the first coat of Dr. Fixit Newcoat at the rate of 2 sqm per litre and allow it to dry before taking up the second coat, Apply second coat of Dr. Fixit Newcoat perpendicular to 1st Coat with same application rate.
• Minimum drying time between coats will be 4 to 6 hours.
• Use the final coat of Dr. Fixit Newcoat Cool as the reflective coat with same application coverage.
• Allow the system to air cure for 7 days minimum.

• All corners, gaps, joints, protrusions & outlets shall be coated with the extra coat.
• Do not apply during rains; substrate MUST be in dry condition for application of primer.
• The product is designed only for light foot traffic and not vehicular or movement of machinery or equipment.
• To achieve the full proof waterproofing, all parapet walls should be covered with Newcoat coool.

Approx. Rs 4,500 / BucketGet Latest Price

• Acrylic elastomeric exterior waterproof decorative coating for exterior walls
• High-performance waterproof coating for all types of externally plastered & concrete walls, especially for the rain lashed walls. Unlike ordinary exterior paints, it provides the dual benefit of aesthetics with waterproofing property to external walls.

• Dr. Fixit Raincoat is composed of high-quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, many additives & water as a medium.
• It is used as a waterproofing & protective coating for exterior walls of the buildings because
• It forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and an excellent resistance to the growth of microorganisms.

• All types of exterior masonry surfaces, concrete, cement sand renderings, etc.
• Applicable to asbestos sheets.

• Film thickness-Higher film thickness provides resistance to the movements of structures, gives crack bridging ability & waterproofing properties.
• Flexibility-Flexible and covers hairline cracks(up to 0.5 mm) effectively so that no ingress of water.
• Toughness-Tough films withstand wind-driven rain.
• Elasticity-High elasticity easily withstands stress caused by thermal expansion & contraction (>100% elongation at 110-120 micron DFT).
• Ready to use–No dilution is required hence ensures desired film thickness built-up without affecting the performance.
• Microbial Resistance–Resistance to fungus and algae hence maintains the aesthetic value.
• UV Resistant–Resistance to UV (sunlight) hence coating has the longer life.
• Dirt Pick up–Very low dirt pick up & can be cleaned easily hence maintains the aesthetics.
• Breathability-Permeable to water vapour.
• Ease of application– User-friendly, easily applicable by brush, roller or spray.
• Toxicity-It is non-toxic.

• Store in a cool and dry place.
• Keep away from direct sunlight and heat.

• Skin contact: Wash skin with soap & water. Remove contaminated clothes.
• On eye contact: immediately splash eyes with plenty of water. consult the physician if irritation persists.
• Ingestion: Do not induce vomiting. never give anything by mouth to an unconscious person. call a physician.